BIOFANGO HYPERTHERMAL THERMALIS
THERMALIS, BIOFANGO HYPERTHERMAL
Hyperthermal fango registered as a medical device
BIOFANGO is the only mud in the world characterized as a medical device. It has an anti-inflammatory effect, which increases with the frequency and quantity of mud applied.
BIOFANGO is used to treat joint pain and inflammation.
Proven efficacy
University studies have shown that BIOFANGO reduces the release of pro-inflammatory mediators thanks to its ability to desensitize dendritic cells (particularly the islets of Langerhans) with a dose-dependent effect. The result is a reduction in inflammation and
BIOFANGO (MUD) HYPERTHERMAL
Biofango mud is the perfect adjuvant for many rheumatological, physiotherapeutic and rehabilitation treatments. Biofango hyperthermal mud naturally helps relieve painful inflammation of the musculoskeletal system and promotes detoxification, with a remarkable effect on edema. Biofango hyperthermal mud can be used hot or cold. Dermatologically tested, it contains no preservatives.
Biofango active ingredients from the thermal spring of Abano (It)
BIOFANFO is a mineral suspension with a lamellar structure in which the following active and natural elements coexist:
- Lamellar clays rich in silico-aluminates,
- Hyperthermal water from the Euganéen Thermal Basin, rich in natural, essential minerals. Its composition and temperature are essential for the development of a specific plant microflora (algae), enabling it to deliver maximum therapeutic action.
- The microflora is made up of colonies of specific halophilic and thermophilic algae.
- BIOFANGO has a basic pH, which is essential to ensure the "opening" of the lamellar structure, and trap the natural, active elements of hyperthermal water, creating a "hyperthermal cataplasm". On contact with the skin (acid pH = 5-6), the lamellar structure contracts, enabling a "release/absorption" mechanism:
- The release of hyperthermal water and its natural, essential minerals to the skin, and effective transdermal penetration,
- Absorption of catabolites and excess fluid from the skin, thanks to the mud's"sponge" effect.
Cold use
Thermal hypothermia is useful for pathologies involving joints, muscles, tendonitis and oedema, and is used as an elective cold treatment for direct or indirect trauma caused by sporting activities (R.I.C.E. Protocol).
- Place the sachet in the fridge for a few minutes to chill the mud.
- Open the sachet and spread the mud to a thickness of around 1 cm, directly onto the area to be treated, avoiding contact with metal objects.
- Leave on for 40 minutes, then rinse off.
We recommend at least 10 applications, 5 of which should be consecutive.
Hot use
- Open the sachet
- Place the mud in a non-metallic bowl and heat either in a bain-marie or in a microwave oven to a maximum temperature of 39°C. Do not exceed this temperature to avoid burns.
- Spread the mud directly onto the area to be treated, to a thickness of around 1cm.
- Avoid contact with metal objects
- Leave on for 40 minutes, then rinse off.
- After application, insulate with waterproof film and cover with a wool scarf or heating pad to maintain a constant temperature.
Hot Biofango Thermalis® is mainly indicated as an adjuvant in the treatment of rheumatism (especially in the prevention of relapses) and painful conditions of the musculoskeletal system.
Packaging
400 ml / 500 g resealable sachet.
In all cases, please refer to the packaging leaflet.
How to use the anti-snoring belt and its technical features
3-step belt installation
- Pull the red tab to activate the batteries supplied in the electronic device.
- Gently insert the case into the pocket provided.
- Place the anti-snoring belt around your chest, ensuring a snug fit but without discomfort.
Switching on
- Press the central button briefly (less than a second) to switch on the device.
- Two gentle vibrations confirm that it is switched on.
- Lie down as usual. If you're lying on your back, gentle vibrations will prompt you to change position after 10 to 15 seconds.
Switching off
- Press and hold the button for 2-3 seconds.
- A longer vibration signals that the unit is switched off.
Adjusting vibration intensity
- With the unit switched off, hold the button for more than 5 seconds.
- The intensity increases automatically. Release the button as soon as you feel the level is ideal.
- The setting will be saved for the next use.
Replacing the batteries
- Unscrew the two screws on the back of the case using a Philips PH1 screwdriver.
- Remove the old batteries and press the button briefly to discharge any electrical residue.
- Insert two new AAA (1.5V) batteries. A vibration and a green LED indicate that the batteries are correctly inserted.
- Close the case securely, without forcing it, and replace it in the belt.
- If nothing happens, check the polarity or test with other new batteries.
Cleaning and care
- Clean the case with a soft, slightly damp cloth. Never immerse in water.
- The fabricbelt can be hand-washed according to the instructions on the label.
Warranty
Your PosiForm-Belt is covered by a 2-year warranty (excluding batteries and any damage caused by their use), provided you follow the instructions for use.
End of product life
At the end of use, please contact your retailer or a recycling center for responsible disposal of the casing and batteries.
Indications |
Contraindications |
|
|
Package contents
- Intelligent positional treatment box
- One adjustable belt
- Two 1.5V AAA alkaline batteries
- Instructions for use
