24V portable battery for CPAP (Pilot-24 Lite)
Portable battery pack for CPAP/PPC
The new Pilot-24 Lite is a revolutionary small backup power supply and portable travel battery.
This portable CPAP/PPC battery pack is ready to use straight out of the box
The Pilot-24 Lite is compatible with the following CPAPs:
- ResMed AirSens 10
- ResMed AirMini
Optional cables available:
Battery life for CPAP: Battery life is 7 to 8 hours at medium CPAP pressure (approx. 10), with humidifier and tube heater switched off. It can even be 16 hours under certain conditions.
Emergency power supply
By using the Pilot-24 Lite as a permanent backup power supply, you can rest assured that you won't be woken up in the middle of the night to discover that your CPAP machine isn't working.
Travel battery
Using the Pilot-24 Lite as a portable travel PAP battery will help you receive PAP therapy on the move. PAP on the move. This includes remote locations where power is unavailable in situations such as camping, road trips and air travel.
Additional features
The integrated USB port powers a variety of portable electronic devices such as cell phones. portable electronic devices such as cell phones, tablets and cameras. It also features a handy built-in LED flashlight.
What's included
- Pilot-24 Lite battery
- Output cable for ResMed AirSense 10
- Output cable for ResMed AirMini
- Short charging adapter for ResMed AirMini
- Fabric carrying case
- Product manual and quick start guide (English, French, German, Spanish)
Specifications :
- FAA compliant
- Capacity: 95 Wh
- Weight: 1.3 lbs
- Output voltage: 24V for CPAP and 5V, 2.5A for USB
- Approximate use: 1-2 nights (based on optimal settings without humidifier or heated hose)
- Charging time: 2-3 hours
- Warranty: 1 year
- 24V DC
- 580 gr.
- 17x9x2.2 cm
How to use the anti-snoring belt and its technical features
3-step belt installation
- Pull the red tab to activate the batteries supplied in the electronic device.
- Gently insert the case into the pocket provided.
- Place the anti-snoring belt around your chest, ensuring a snug fit but without discomfort.
Switching on
- Press the central button briefly (less than a second) to switch on the device.
- Two gentle vibrations confirm that it is switched on.
- Lie down as usual. If you're lying on your back, gentle vibrations will prompt you to change position after 10 to 15 seconds.
Switching off
- Press and hold the button for 2-3 seconds.
- A longer vibration signals that the unit is switched off.
Adjusting vibration intensity
- With the unit switched off, hold the button for more than 5 seconds.
- The intensity increases automatically. Release the button as soon as you feel the level is ideal.
- The setting will be saved for the next use.
Replacing the batteries
- Unscrew the two screws on the back of the case using a Philips PH1 screwdriver.
- Remove the old batteries and press the button briefly to discharge any electrical residue.
- Insert two new AAA (1.5V) batteries. A vibration and a green LED indicate that the batteries are correctly inserted.
- Close the case securely, without forcing it, and replace it in the belt.
- If nothing happens, check the polarity or test with other new batteries.
Cleaning and care
- Clean the case with a soft, slightly damp cloth. Never immerse in water.
- The fabricbelt can be hand-washed according to the instructions on the label.
Warranty
Your PosiForm-Belt is covered by a 2-year warranty (excluding batteries and any damage caused by their use), provided you follow the instructions for use.
End of product life
At the end of use, please contact your retailer or a recycling center for responsible disposal of the casing and batteries.
Indications |
Contraindications |
|
|
Package contents
- Intelligent positional treatment box
- One adjustable belt
- Two 1.5V AAA alkaline batteries
- Instructions for use
